RG6 is the most common choice. But let's not forget. RG specifications, which used to be called "radio guide", are used to differentiate different types of cables. However, they are not the only way. RG6 cables are thicker and have better shielding than RG59 cables. Many RG59 cables, however, are simply RG6 cables that weren't designed to meet these specifications and are just repackaged.
You can also check How to Activate Windows 7 without product key
How to determine what you have
You'll find words at the sides of almost every cable. You should see words on the side of any cable. It should state that it is RG59, RG6 or RG11. If not, it's likely not professional grade cable and should be avoided. To find out more, you can Google the writing on the side.
You will find a braided sheath of metal around the white or clear center of each of these cables. It may also have a small piece of copper at its center.
RG59 stands for antennas
I don't usually buy RG59 cables anymore, but if I do, it will be for an antenna. RG59 cable is more susceptible to loss and can't handle satellite frequencies.
Most satellite cables are made using RG6.
Properly constructed RG6 cables should allow you to receive a stronger signal over a longer time. This is especially important for satellite TV, as there is a lot more signal. Antennas work well with RG59 cables, but they also work well with RG6.
RG11 is for specific uses only
RG11 cables are used for burial and very long runs. It is so thick it requires special connectors. Also, it can be difficult to bend. It is not recommended for indoor installations as it can be a pain to use.
What should you look for in a cable?
You should look for cables that have been sweep-tested to 3GHz. This means that they will work with satellites. They also need to have a solid copper core conductor wherever power is being used, such as where the power inserter is. Quad-shielded cables don't seem to be very important for home, but they are an option.
Take stock of cables you salvaged from other projects. Are there any corrosion marks around the connectors Is it possible that the cable has been bent at any point? It's not always the best option to use older cables. While they may be useful for a brief time, they may not be the best option for long-term solutions.
If you want to learn an awful lot more about cables, check out Cables 101, our series that takes you through all the different types of cables and all the terms associated with them.
Cables available for purchase
Skip the home store if you are looking for cables to connect satellite TV and cellular boosters. The majority of cables that you will find in the home store are inferior quality. These cables have ends that are not commercial grade. Bulk cables purchased at home don't always have solid copper center conductors. This is essential for modern satellite TV systems.
Instead, buy from a high-end retailer like Solid Signal. It'll be easy to find the right cable for you and it will fit your needs. You'll also find lots of tech support at no cost. Our 100% US-based phone center can assist you in deciding what cable is best for you.
For more information you can also check TechPerx
No comments:
Post a Comment