How to boot Windows in Safe Mode

 Running your PC in safe Mode is a good method of identifying common issues that your PC may be experiencing, including harmful malware and programs which could be a threat to your security. There are a variety of ways to go into Safe Mode in Windows 10 when you're booting up or restarting your system. Learn more about what, and when to make use of this crucial Windows feature.

You may also like How to Remove Activate Windows Watermark Permanently Windows 10

How do I Start Windows 10 in Safe Mode

There are two methods of booting your computer into Windows 10 Safe Mode. If your computer is able to load the login screen, you can start Windows 10 in Safe Mode at startup. If you get blank screens when you start your computer, follow these steps to boot into Safe Mode from a blank screen.

Instructions for launching Safe Mode from the sign-in screen:

1. Start your PC.
2. When you are prompted to sign in, select Power > Restart While holding the shift key.
3. The computer will reboot however this time, it will show an option screen. Choose Troubleshoot > Advanced options' > 'Startup Settings Restart'.
4. Your computer will reboot for the third time and will display a second set of options, including the option of starting your computer with Safe Mode. Follow the directions according to how you'd like for your PC to function

   A) Press F4 or F4 to start into Safe Mode.b) Press F5 or 5 , to begin booting into Secure Mode using networking (if you'd like the internet on your).

How to start Safe Mode from a blank screen:

1. Press your Windows symbol keys (normally between CTRL and Alt in your keyboard) simultaneously by pressing Ctrl, Shift and B. If you're operating Windows 10 on a tablet then you'll have to press the volume up or decrease the volume button three times in a two-second time.
2. The screen should fade or flicker and you should hear a sound that indicates it is because Windows will attempt to refresh.

Make sure you are connected.

If you attempted to boot into Safe Mode from a blank screen, but nothing happens then there could be an issue with your connection to your computer or display. Here are some ideas to test:

If you're using a desktop PC:

• Make sure that your display is connected and on.
• Make sure that your monitor is in operation and has been adjusted to the right input.
• Changes in the driver could result in video being delivered to a different type of output on your computer. Switch the cable between your monitor and computer to one that has different types of output. For instance, if they were connected using an VGA cable, you can try an HDMI or Displayport cable instead. Review your computer's or monitor's documentation to determine which output options they can accept.
• If you encounter an issue with the driver for your video card on your computer it could be set to using integrated graphics in the processor, which output via the motherboard. If you can, try switching the monitor's cable to your front of your motherboard and its video output to the card.

In the event that you're connected via an external screen via an iPad or laptop:

• If it's at docking stations, take it out for a moment.
• Make sure whether the external monitor is connected and powered on.
• Examine broken cable (DVI, VGA, HDMI, Thunderbolt, DisplayPort) or loose connections. You may also find malfunctioning adapters (such as DVI-to-VGA).
• When you're working with multiple monitors Try projecting video onto another display. Use the Windows logo key + P, choose one of the displays, and enter. Enter.

How do I start Windows 10 in Safe Mode

If you're logged into your profile on the system You can restart to Safe Mode from the settings menu. In contrast to previous Windows versions, there's no need for the Secure Mode command prompt when using Windows 10.

Steps to start Safe Mode from the Settings menu:

1. Go to the Settings menu on your computer with one of the two methods below:

   (a) Click the 'Start' button on the lower left corner of your screen, and then select "Settings".
   Alternatively:
   B) hold your finger on the Windows Logo key in your keyboard, then press I simultaneously.

2. Choose 'Update & Security'.
3. Choose 'Recovery' from left menu.
4. Click the Restart Now button under Advanced Startup.
5. Your computer will then restart however this time, it will show the options page. Choose 'Troubleshoot', then 'Advanced options' > 'Startup settings" > Restart.
6. Your computer will reboot for the third time and will display a second option list, which includes the option of starting your computer using Safe Mode. Follow the directions depending on the way you want you to utilize your laptop

   A) Press and hold the F4 key or four to boot into Safe Mode.
   B) Press F5 or 5 until you are in Safe Mode and networking (if you'd like Internet access).

If you wish to exit Safe Mode, simply restart your computer. Once it is booted up, you'll be back in the regular Windows installation.

What is Safe Mode?

The Safe Mode feature is an method to run your PC or mobile device which lets you identify problems within the operating system. Contrary to normal operating modes the Safe Mode only loads the programs it needs, disregarding (or operating in a low-resolution) any third-party applications or drivers that you might have installed. It's been part of Windows operating systems since 1995.

When should you boot into Safe Mode?

As a diagnostic tool it is generally necessary to enter Safe Mode when you need to resolve a issue with your computer or device. This could be particularly useful if you've tried other ways of dealing with common issues in Windows 10.

If you are experiencing the same issue you've experienced when it's operating in Safe Mode, you'll know there's a problem with the default settings of your device and drivers. If you are unable to reproduce the issue while in Safe Mode and you're able to conclude that the issue lies with your device's non-essential applications and software.

With so few features installed, booting with Windows Safe Mode allows you to address common problems like malware issues and unreliable hardware drivers without putting at risk your entire network or system.

Another reason you should start in Safe Mode is if you have found harmful software from third parties. This is due to the fact that Safe Mode lets you open your Control Panel and remove the software, but not allowing it to run automatically on start-up, which can harm or infect your PC as well as your Windows device. Check out our guide on protecting your privacy online, and get strategies to avoid the possibility of such attacks.

Disable or Enable DHCP for Ethernet or Wi-Fi in Windows 11/10

 Internet Protocol (IP) networks make use of the Dynamic Host Configuration Protocol or DHCP as a standard network protocol because it's an extremely secure and reliable configuration. It lets users efficiently and effectively assign IP addresses that can be reused. If you have an DHCP server that is installed and configured within your network, DHCP enabled clients will receive IP addresses as well as related framework parameters each when they become part of the network. This can greatly cut down the time required to set up and reconfigure the computers on networks. 

Sometimes, you might encounter issues accessing the Internet. After trying every troubleshooting step and solutions, an error message will be displayed on your screen saying ' DHCP is not disabled'. If DHCP isn't turned on by default on your Windows PC, this article will explain how to enable or deactivate DHCP in order to enable Ethernet, Wi-Fi or Local Area Connection in Windows 11/10/8/7.

You may also like How to Change The DHCP Lease Time Windows 10

Enable DHCP for Ethernet or Wi-Fi

Start by opening ' Control Panel and type in ' Network and Sharing Center into the search bar on the panel, and then press the Enter key.

Click the ' Change the Adapter Settings Link that is visible on the 'Network as well as Sharing Center' screen. If you're connected to the Ethernet connection, click the right option and select Properties. If you've connected to a broadband network select Wi-Fi, and then follow the same steps as described above.

Then, in the Ethernet/Wi-Fi Properties window, locate and double-click the " Internet Protocol Version 4 (TCP/IPv4)' item as illustrated in the image below.

Once you're done, Internet Protocol Version 4 Properties box will be displayed. To switch DHCP on, simply look at the radio boxes against

1. Get an IP address instantly - the upper portion of 'General Screen.'
2. Find DNS server addresses automatically. It's located in the lower portion of the General Screen.'

Windows 11/10 will be in a position to get an IP address via the DHCP server. To stop this check these options.

To determine that DHCP is turned on or off To confirm if DHCP is enabled or disabled, execute the following command inside CMD:

ipconfig /all

You will be able to view - DHCP enabled ... No/Yes.

If the issue persists, then you should examine the Firewall settings and ensure that your firewall doesn't block your Internet connection. Certain Antivirus software can block an unidentified connection to ensure security. In this instance you could try to reset the default settings of your Windows Firewall and see how it works.

How to Set Up Bluetooth for a Windows 7 PC

 Bluetooth is a great substitute for wires. With Bluetooth it is possible to connect compatible phones, mice headsets, printers, tablets, keyboards and other devices to your PC, provided that it is compatible with Bluetooth.

All in all, Bluetooth is pretty simple to use, however it could be difficult for new users. In order to connect two Bluetooth devices it is necessary that one (or each) of them has to become "discoverable." This initial Bluetooth connection procedure is referred to by the term "pairing."

You may also like how to activate windows 7 without product key

Are you confused? We'll help you understand the steps to set the Bluetooth connection for Windows 7. Bluetooth to work with Windows 7.

Notification: It's time to upgrade to Windows 10! Learn more about how to control Bluetooth with Bluetooth on Windows 10 when you upgrade your PC!

Turn on Bluetooth on Your Computer and Device

First, make sure Bluetooth is turned on in your laptop. Most laptops are equipped with Bluetooth support, however, it could be turned off by default in order to conserve energy for the battery. Most of the time, you will discover a button on the laptop's keyboard that switches Bluetooth. It could also be an icon within the System Tray at the bottom-right of the screen, or an option on the software provided by your computer's manufacturer.

If your computer does not have Bluetooth connectivity (which occurs with most desktops) it is possible to purchase a low-cost Bluetooth adapter. It's a small USB dongle that allows Bluetooth access to any device.

Then, make sure that Bluetooth is for the device you wish to pair with your laptop. Bluetooth is standard on Bluetooth headsets and mice however it is not always enabled on tablets and smartphones.

The exact position of this option will depend on the model of your device.

On Android the swipe to towards the upper right corner of your screen two times to open Quick Settings. After that, make sure that you've Bluetooth activated. iOS users must access Control Center by swiping up from the bottom of the screen (iPhone 8 or earlier) or by swiping downwards from the upper-right corner on the display (iPhone 8 or earlier)). After that, tap on the Bluetooth symbol to activate it in the event that it's not.

Make the PC and Devices Discoverable

Although Bluetooth is now available on both your laptop and mobile device, they aren't able to be able to see each one. To allow an Bluetooth device to be able to connect with the other, it has to be detectable. When it's in discoverable mode, the computer or device broadcasts signals that advertise its own. This is set to be off by default to protect your device and only has to be enabled when connecting devices.

It's all you need to do is make one device accessible. Making this happen for either your device or your PC you'd like to connect to is possible, however it's not a bad idea to make it happen for both.

To enable the Windows 7 PC discoverable, select on the start button and then select Printers and Devices from the left of the menu. Select your computer's name (or Bluetooth adapter name) in the list of devices, and then select Bluetooth setting.

If you have to accomplish this on more recent Windows versions there is a tutorial for connecting your mobile via Bluetooth for Windows 10.

Select to select the Accept Bluetooth devices to locate your computer checkbox on the Bluetooth Settings window, the select "OK". Your computer should now be accessible to other devices.

To make your smartphone discoverable to other phones, you must go through the Bluetooth options. If you're using Android it's located in the Settings menu, then Connected Devices. If you're using iOS go for settings and then Bluetooth. The two will show the message "Now available as [Namefor the device] to indicate that the Bluetooth device is set to pair.

If you're pairing devices such as an Bluetooth device, such as a mouse, or headphones, make sure you follow directions in the manual to set the device in pairing mode. Typically, you'll need keep the button on power for a few minutes or more.

Pair the Device

Now you can connect the device to your computer. If you've made your computer detectable, you'll be able to select your computer in the listing of devices displayed on your smartphone or tablet to begin the pairing process.

Alternately, you can connect a device with your computer, so it is able to be identified. To begin, select the Add device button on the Printers and Devices Panel in Windows 7. (If you'd like to connect to a Bluetooth printer then select Add an printer rather than.)

Windows will search for detectable Bluetooth devices and display these devices in the listing. Choose one, then Click next to add it to the list.

If you can't find your Bluetooth device, make sure that it's detectable and Bluetooth enabled. As we've mentioned earlier that this might require an input from a particular button on Bluetooth devices like keyboards.

On the majority of devices, you'll be able to get the passcode. Check that the password for your computer and the device are identical. This will help you make sure you're connecting to the right machine and not a different computer.

You'll need to accept the pairing request in order to establish the connection. If you pair a phone, you'll have to verify the pairing code in both your mobile as well as your computer. A pop-up will appear inviting you to sign-in to the link. This prevents other users from connecting to your device while it's in detectable mode.

After you've confirmed, Windows may install drivers when needed. You're now ready to begin using it.

You can double-click on the device's icon in the Devices and Printers window to gain access to additional options, including the capability to transfer music and files. The specific features you can avail depend on the device you're using.

Discover, Pair, and Go

Once your computer and device have been paired so that they can continue to work together. You don't need to perform the pairing procedure every time you wish to use the device and they'll be connected automatically once they're within range and on.

If you're not actually connecting devices, for security, you must ensure that both your devices and the PC aren't able to be identified. You might also want to turn off Bluetooth whenever you're not in use this can save energy on both your PC and device.